SawMatch Find a blade
BLADE FINDER

Describe the cut. Get a blade class.

No login and no product catalog steering the answer. Machine dimensions remain yours to verify.

Recommendations are neutral and stored only in the URL fragment when shared.
High for blade class; verify product rating

Ground-tooth high-carbon-steel blade for plywood

Jigsaw can make this cut when machine fit, section thickness, tooth engagement, workholding, and dust or chip control are all verified.

Blade construction
Ground-tooth high-carbon-steel blade
Teeth or grit
8–12 TPIConfirm the blade maker’s stated thickness range; tube wall thickness matters more than outside diameter.
Tooth geometry
Ground side-set tooth with controlled clearance
Machine fit
T-shankConfirm clamp compatibility in the jigsaw manual; “universal” is not a guarantee.
Kerf / body
Blade body chosen for stiffness, curve radius, and access
Speed and feed
Reach operating speed before entry where specified, then feed steadily without forcing or dwelling.

Set up the cut

  1. Support the sheet continuously near the cut and protect the visible face.
  2. Reach operating speed before entry where specified, then feed steadily without forcing or dwelling.
  3. Confirm clamp compatibility in the jigsaw manual; “universal” is not a guarantee.
  4. Keep the shoe flat, minimize orbital action for brittle or metal work, and orient the presentation face for the selected tooth direction.

Avoid

  • Forcing a dull blade to recover feed rate.
  • Unsupported offcuts that pinch, break away, or pull the tool off line.
  • A blade that is too short for the stroke or too wide for the required curve.
HOW TO USE THE RESULT

Take the specification to any brand.

The result describes construction, pitch, geometry, fit, and setup. Match those properties against a blade manufacturer’s application and thickness range. A matching color, name, or shank alone is not enough.

Before purchase

  • Confirm the exact tool model and manual.
  • Check blade dimensions, maximum RPM, and application label.
  • Verify the workpiece is within the blade’s stated thickness range.
  • Reject any adapter or workaround the tool manufacturer does not approve.